Articles de revues

Choisissez une année:

2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011
2010
- 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001
2000
- 1999 - 1998 - 1997 - 1996 - 1995 - 1994 - 1993 - 1992 - 1991
1990 - 1989

2017

  1. S. Loquai, B. Baloukas, J.E. Klemberg-Sapieha, L. Martinu, "HiPIMS-deposited thermochromic VO2 films with high environmental stability", Solar Energy Materials and Solar Cells,  160 (2017) 217-224.

  2. X. Rimpault, J.-F. Chatelain, J.E. Klemberg-Sapieha, M. Balazinski, "Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals", CIRP Journal of Manufacturing Science and Technology, 16 (2017) 72-80.

  3. T. Poirié, T. Schmitt, E. Bousser, L. Martinu, J. E. Klemberg-Sapieha, "Influence of internal stress in optical thin films on their failure modes assessed by in situ real-time scratch analysis", Tribology International, 109 (2017) 355-366.

  4. D. Batory, W. Szymanski, M. Panjan, O. Zabieda, J.E. Klemberg-Sapieha, "Plasma nitriding of Ti6Al4V alloy for improved water erosion resistance", Wear, 374-375 (2017) 120-127.

  5. T. Poirié, T. Schmitt, E. Bousser, R. Vernhes, L. Martinu, J. E. Klemberg-Sapieha, "Hybrid organic/inorganic nanolaminate structures with enhanced tribo-mechanical properties for optical applications",  Surface and Coatings Technology, 315 (2017) 399-407.

  6. M. Caron, O.Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Stability and performance of organic-inorganic thin films on polymer substrates", Surface and Coatings Technology, 314 (2017) 131-138.

  7. X. Rimpault, J.-F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Burr height monitoring while drilling CFRP/titanium/aluminium stacks", Mechanics & Industry, 18(1) (2017) 114.

  8. B. Baloukas, M. A. Arvizu, R.-T. Wen, G. A. Niklasson, C. G. Granqvist, R. Vernhes, J. E. Klemberg-Sapieha, and L. Martinu, "Galvanostatic Rejuvenation of Electrochromic WO3 Thin Films: Ion Trapping and Detrapping Observed by Optical Measurements and by Time-of-Flight Secondary Ion Mass Spectrometry", ACS Applied Materials & Interfaces, 9(20) (2017) 16995–17001.

  9. F. Pougoum, T. Schmitt, L. Martinu, J. E. Klemberg-Sapieha, S. Savoie, R. Schulz, "Wear behavior of Fe 3 Al-TiN-TiB 2 HVOF coatings: A comparative study between in situ and ex situ powder processing routes", Ceramics International, 43(11) (2017) 8040-8050.

  10. S. Lavigne, F. Pougoum, S. Savoie, L. Martinu, J. E. Klemberg-Sapieha, R. Schulz, "Cavitation Erosion Behavior of HVOF CaviTec Coatings", Wear, 386–387 (2017) 90–98.

2016

  1. T. Poirié, T. Schmitt, E. Bousser, L. Martinu, J. E. Klemberg-Sapieha, "In situ real time nanowear testing method of optical functional thin films", Tribology International, 95 (2016) 147-155 .

  2. J. Kohout, E. Bousser, T. Schmitt, R. Vernhes, O. Zabeida, J. Klemberg-Sapieha and L. Martinu, "Stable reactive deposition of amorphous Al2O3 films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle", Vacuum, 124 (2016) 96-100.

  3. L. Vernhes, M. Azzi, E. Bousser, T. Schmitt, J. M. Lamarre, J. E. Klemberg-Sapieha, "Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC Coating Systems", J. Thermal Spray Techn., 25(1) (2016) 346-356.

  4. D. Goldbaum, P. Manimuda, G. Kamath, S. Descartes, J. E. Klemberg-Sapieha, R. Chromik,Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates”, Surface and Coatings Technology, 291 (2016) 264–275.

  5. R.D. Farahani, M. Gagné, J.E. Klemberg-Sapieha, D. Therriault, "Electrically conductive silver nanoparticles-filled nanocomposite materials as surface coatings of composite structures", Advanced Engineering Materials, 18(7) (2016) 1189-1199.

  6. F. Pougoum, L. Martinu, P. Desjardins, J. Klemberg-Sapieha, S. Gaudet, S. Savoie, R. Schulz, "Effect of high-energy ball-milling on the characteristics of Fe3Al-based HVOF coatings containing boride and nitride phases", Wear, 358-359 (2016) 97-108.

  7. S. Loquai, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "HiPIMS-deposited thermochromic VO2 films on polymeric substrates", Solar Energy Materials & Solar Cells, 155 (2016) 60-69.

  8. X. Rimpault, J.-F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski, "Surface Profile Topography of Trimmed and Drilled Carbon/Epoxy Composite", Procedia CIRP, 45 (2016) 27-30.

  9. G. Taillon, F. Pougoum, S. Lavigne, La. Ton-That,  R. Schulz, E. Bousser, S. Savoie, L. Martinu, J. Klemberg-Sapieha, "Cavitation erosion mechanisms in stainless steels and in composite metal-ceramic HVOF coatings", Wear, 364-365 (2016) 201-210.

  10. S. Loquai, O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu, "Flash post-discharge emission in a reactive HiPIMS process", Appl. Phys. Lett, 109 (2016) 114101.

  11. F. Pougoum, L. Martinu, J.E. Klemberg-Sapieha, S. Savoie, R. Schulz, "Wear properties of Fe3Al-based HVOF coatings strengthened with in-situ precipitated nitride and boride particles",  Surface and Coatings Technology, 307 (2016) 109-117.

  12. W. Trottier-Lapointe, O. Zabeida, T. Schmitt, L. Martinu, "Ultra-Low Refractive Index Optical Films with Enhanced Mechanical Performance Obtained by Hybrid Glancing Angle Deposition", Applied Optics, 55(31) (2016) 8796-8805.

  13. S. Hafezian, K. Maloney, J. Lefebvre, L. Martinu, S. Kéna-Cohen, "Continuous ultrathin silver films deposited on SiO2 and SiNx using a self-assembled monolayer", Applied Physics Letters, 109 (2016) 121603.

  14. L. Wang, D. Moghe, S. Hafezian, P. Chen, M. Young, M. Elinski, L. Martinu, S. Kéna-Cohen, R. R. Lunt, "Alkali Metal Halide Salts as Interface Additives to Fabricate Hysteresis-Free Hybrid Perovskite-Based Photovoltaic Devices", ACS Applied Materials & Interfaces 8(35) (2016) 23086-23094.

  15. X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction" Measurement, 91 (2016) 84-92.

  16. X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski,  "Fractal Analysis of Cutting Force and Acoustic Emission Signals During CFRP Machining" Procedia CIRP, 46  (2016) 143-146.

 
 Haut

2015

  1. S. Ligot, E. Bousser, D. Cossement, J. Klemberg-Sapieha, P. Viville, Ph. Dubois, R. Snyders,"Correlation Between Mechanical Properties and Cross Linking Degree of Ethyl Lactate Plasma Polymer Films", Plasma Processes ans Polymers, 12(6) (2015) 508-518.

  2. J.C. Qian, Z.F. Zhou, C. Yan, D.J. Li, K.Y. Li, S. Descartes, R. Chromik, W.J. Zhang, I. Bello, L. Martinu, J.E. Klemberg-Sapieha,  "Tailoring the mechanical and tribological properties of sputtered boron carbide films via the B1 − xCx composition", Surface and Coatings Technology, 267 (2015) 2-7.

  3. J.C. Qian, Z.F. Zhou, W.J. Zhang, K.Y. Li, I. Bello, L. Martinu, J.E. Klemberg-Sapieha, "Microstructure and tribo-mechanical properties of Ti–B–C nanocomposite films prepared by magnetron sputtering", Surface and Coatings Technology, 270 (2015) 290-298.

  4. H. Camirand, B. Baloukas, J. E. Klemberg-Sapieha, L. Martinu, “In situ spectroscopic ellipsometry of electrochromic amorphous tungsten oxide films”, Solar Energy Materials & Solar Cells, 140 (2015) 77-85.

  5. M. Panjan, S. Loquai, J. Klemberg-Sapieha, L.Martinu, "Non-uniform plasma distribution in dc magnetron sputtering: Origin, shape and structuring of spokes" , Plasma Sources Sci. Technol., 24 (2015) 065010.

  6. R. Vernhes and L. Martinu, "TRACK – A new method for the evaluation of low-level extinction coefficient in optical films", Optics Express, 23(22) (2015) 28501; Spotlight on Optics 2015 Dec.

  7. R.D. Farahania, J.E. Klemberg-Sapieha, D. Therriault, "Enhanced conductivity of nanocomposite films through heterogeneous distribution of nanofillers during processing", Materials & Design, 88 (2015) 1175-1182.

  8. F. Venne, M. Quintanilla, F. Quenneville, D. Isik, B. Baloukas, F. Vetrone, C. Santato, Toward Near-Infrared Photosensitization of Tungsten Trioxide Nanostructured Films by Upconverting Nanoparticles, RSC Adv., 5 (2015) 81875-81880.

  9. M. A. Arvizu, R.-T. Wen, D. Primetzhofer, J.E. Klemberg-Sapieha, L. Martinu, G. A. Niklasson, and C. G. Granqvist, "Galvanostatic Ion Detrapping Rejuvenates Oxide Thin Films", ACS Appl. Mater. Interfaces, 7 (48) (2015)  26387-26390.

 Haut

2014

  1. M.-M. de Denus-Baillargeon, T. Schmitt, S. Larouche, and L. Martinu, "Design and fabrication of stress-compensated optical coatings: Fabry–Perot filters for astronomical applications", Applied Optics, 53(12) (2014) 2616-2624.

  2. J.-P. Fortier, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Thermochromic VO2 thin films deposited by HiPIMS", Solar Energy Materials & Solar Cells, 125 (2014) 291-296.

  3. M. Hála, R. Vernhes, O. Zabeida, E. Bousser, J.E. Klemberg-Sapieha, R. Sargent, L. Martinu, "Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods", Surface and Coatings Technology, 241 (2014) 33 - 37.

  4. D. Li, S. Guruvenket, J. A. Szpunar, J. E. Klemberg-Sapieha, "Effect of C/Si Ratio on the Electrochemical Behavior of a-SiCx:H Coatings on SS301 Substrate Deposited by PECVD", International Journal of Corrosion, 2014 (2014) 565109.

  5. M. Tousignant, O. Zabeida, G. Rudkowska, A. Yelon, "Investigation of surface effect on giant magnetoimpedance in microwires", Journal of Magnetism and Magnetic Materials, 349 (2014) 232–234.

  6. Baloukas, W. Trottier-Lapointe, L. Martinu, "Fabry-Perot-like interference security image structures: From passive to active", Thin Solid Films, 559 (2014) 9-13.

  7. S. Hafezian, B. Baloukas, L. Martinu,"Percolation threshold determination of sputtered silver films using Stokes parameters and in situ conductance measurements", Appl. Opt., 53(24) (2014) 5367-5374.

  8. E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "Solid particle erosion mechanisms of protective coatings for aerospace applications", Surface and Coatings Technology, 257 (2014) 165-181.

  9. V. Marushka, O. Zabeida, L. Martinu, "Distribution of ion current density on a rotating spherical cap substrate", J.Vac.Sci.Technol. A 32(6) (2014) 061513.

  10. J. C. Qian, S. K. Jha, B. Q. Wang, E. V. Jelenkovic, I. Bello, J. E. Klemberg-Sapieha, L. Martinu, and W. J. Zhang, "High quality boron carbon nitride/ZnO-nanorods p-n heterojunctions based on magnetron sputtered boron carbon nitride films", Appl. Phys. Lett. 105 (2014) 192104.

  11. M. Hála, R. Vernhes, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, "Reactive HiPIMS deposition of SiO2/Ta2O5 optical interference filters", J. Appl. Phys. 116  (2014) 213302.

 Haut

2013

  1. L. Vernhes, D.A. Lee, D. Poirier, D. Li, J.E. Klemberg-Sapieha, "HVOF Coating Case Study for Power Plant Process Control Ball Valve Application", Journal of Thermal Spray Technology, 22 (2013) 1184-1192.
  2. E. Bousser, L. Martinu and J.E. Klemberg-Sapieha, "Solid particle erosion mechanisms of hard protective coatings", Surface and Coatings Technology,  235 (2013) 383-393.

  3. J. Capek, M. Hala, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, "Deposition rate enhancement in HiPIMS without compromising the ionized fraction of the deposition flux", J. Phys. D: Appl. Phys. 46 (2013) 205205.

  4. R. Vernhes, J.E. Klemberg-Sapieha,L. Martinu, "Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications", Sensors and Actuators B: Chemical, 185 (2013) 504–511.

  5. L. Vernhes, M. Azzi, J.E. Klemberg-Sapieha, "Alternatives for hard chromium plating: Nanostructured coatings for severe-service valves", Materials Chemistry and Physics, 140(2–3)  (2013) 522-528.

  6. E. Bousser, L. Martinu and J. E. Klemberg-Sapieha, "Effect of erodent properties on the solid particle erosion mechanisms of brittle materials", J. Mat. Sci.  48(16) (2013) 5543-5558.

  7. C. Harkati Kerboua, J.-M. Lamarre, M. Chicoine, L. Martinu, S. Roorda, "Elongation of gold nanoparticles by swift heavy ion irradiation: Surface plasmon resonance shift dependence on the electronic stopping power", Thin Solid Films 527 ( 2013) 186-192.

  8. C. Yan, J.C. Qian, T.W. Ng, Z.F. Zhou, K.Y. Li, W.J. Zhang, I. Bello, L. Martinu, J.E. Klemberg-Sapieha, "Sputter deposition of hard quaternary Al–Mg–B–Ti nanocomposite films", Surface and Coatings Technology, 232 (2013) 535-540.

  9. A. Ragusich, G. Taillon, M. Meunier, L. Martinu, J.E. Klemberg-Sapieha, "Selective pulsed laser stripping of TiAlN erosion-resistant coatings: Effect of wavelength and pulse duration", Surface and Coatings Technology, 232 (2013) 758-766.

  10. E. Bousser, L. Martinu, J.E. Klemberg-Sapieha, "In situ real-time solid particle erosion testing methodology for hard protective coatings", Surface and Coatings Technology, 237 (2013) 313-319.

 Haut

2012

  1. D. Li, S. Hassani, S. Poulin, J.A. Szpunar, L. Martinu, J.E. Klemberg-Sapieha, "Effect of Si and C concentration on the microstructure, and the mechanical, tribological and electrochemical properties of nanocomposite TiC/a-SiC:H/a-C:H coatings prepared by plasma enhanced chemical vapor deposition", J.Appl. Phys., 111 (2012) 043512.

  2. C. P. Liu, H. E. Wang, T. W. Ng, Z. H. Chen, W. F. Zhang, C. Yan, Y. B. Tang, I. Bello, L. Martinu, W. J.Zhang, and S. K. Jha, " Hybrid photovoltaic cells based on ZnO/Sb2S3/P3HT heterojunctions", Phys.Status Solidi B, 249 (2012) 627.

  3. J. Capek, M. Hala, O. Zabeida, J.E. Klemberg-Sapieha and L. Martinu, "Steady state HiPIMS discharge optimization through the control of the magnetic field", J. Appl. Phys., 111 (2012) 023301.

  4. M. Hala, J. Capek, O. Zabeida, J. Klemberg-Sapieha, and L. Martinu; "Pulse management in high power pulsed magnetron sputtering of niobium", Surface and Coatings Technology, 204 (2010) 1616–1622.

  5. M. Hala, J. Capek, O. Zabeida, J. Klemberg-Sapieha, and L. Martinu, "Hysteresis-free deposition of niobium oxide films by HiPIMS using different pulse management strategies", J. Phys. D: Appl. Phys. 45 (2012) 055204.

  6. A. Anders, J. Capek, M. Hala, L. Martinu, "The recycling trap: A generalized explanation of discharge runaway in high power impulse magnetron sputtering", J. Phys. D: Appl. Phys. 45 (2012) 012003.

  7. B. Baloukas, L. Martinu, "WO3∕SiO2 composite optical films for the fabrication of electrochromic interference filters", Appl. Opt. 51 (2012) 3336-3346.

  8. M. Azzi and J.E. Klemberg-Sapieha, “Effect of microstructure on the corrosion behavior of TiN coatings”, Advanced Materials Research, 415-417 (2012) 1911-1916.

  9. E. Çetinörgü-Goldenberg, J. E. Klemberg-Sapieha, and L. Martinu, "Effect of postdeposition annealing on the structure,composition, and the mechanical and optical characteristics of niobium and tantalum oxide films", Applied Optics 51 (27 / 20)  (2012) 6498-6507.

Haut

2011

  1. M. Hala, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu; "Dynamics of HiPIMS Discharge Operated in Oxygen," IEEE Transactions on Plasma Science, 39 (2011) 2582-2583.

  2. E. Cetinorgu-Goldenberg, B. Baloukas, O. Zabeida, J. Klemberg-Sapieha and L. Martinu, "Optical and Tribo-Mechanical Stability of Optically Variable Interference Security Devices Prepared by Dual Ion Beam Sputtering", Applied Optics, 50(19) (2011) 3351-3359.

  3. Hong-En Wang, L.-X. Zheng, C.-P. Liu, Y.-K. Liu, C.-Y. Luan, H. Cheng, Y.Y. Li, L. Martinu, J.A. Zapien, I. Bello, "Rapid "Microwave Synthesis of Porous TiO2 Spheres and Their Applications in Dye-Sensitized Solar Cells", The Journal of Physical Chemistry C, 115(21) (2011) 10419-10425.

  4. Hong-En Wang, H. Cheng, C. Liu, X. Chen, Q. Jiang, Z. Lua, Y.Y. Li, C.Y. Chung, W.J. Zhang, J.A. Zapien, L. Martinu, I. Bello, "Facile synthesis and electrochemical characterization of porous and dense TiO2 nanospheres for lithium-ion battery applications", Journal of Power Sources, 196 (2011) 6394–6399.

  5. B. Baloukas, J.-M. Lamarre and L. Martinu, "Electrochromic interference filters fabricated from dense and porous tungsten oxide films", Solar En. Materials and Solar Cells, 95 (3) (2011) 807-815.

  6. B. Baloukas, J.-M. Lamarre and L. Martinu, "Active metameric security devices using an electrochromic material", Applied Optics, 50 (9) (2011) C41-C49.

  7. M. Azzi, J.E. Klemberg-Sapieha & L. Martinu, "Corrosion Behavior of Cr(Si)N/301 stainless steel system", ECS transactions, 35 (2011) 67-73.

  8. A.M. Wusatowska-Sarnek, B. Dubiel, A. Czyrska-Filemonowicz, P.R. Bhowal, N. Ben Salah, J.E. Klemberg-Sapieha, “Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (12) (2011) 3813-3825.

  9. H.W. Strauss, R.R. Chromik, S. Hassani, J.E. Klemberg-Sapieha, “In situ tribology of nanocomposite Ti-Si-C-H coatings prepared by PE-CVD”, Wear, 272 (2011) 133-148.

  10. D. Li, S. Guruvenket, S. Hassani, E. Bousser, M. Azzi, J.A. Szpunar, J.E. Klemberg-Sapieha, “Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 410”, Thin Solid Films, 519 (7) (2011) 3128–3134.

  11. D. Li, S. Guruvenket, J. E. Klemberg-Sapieha, "Corrosion and tribo-corrosion enhancement of SS301 and Ti–6Al–4V substrates by amorphous hydrogenated SiN/SiC/a-C multilayer coating architecture", Surface & Coatings Technology, 206 (2011) 1893–1898.

Haut

2010

  1. M. Azzi, M. Benkahoul, J.E. Klemberg-Sapieha, L. Martinu "Corrosion and mechanical properties of duplex-treated 301 stainless steel", Surface & Coatings Technology, 205 (5) (2010) 1557-1563.

  2. M. Azzi, P. Amirault, M. Paquette, J.E. Klemberg-Sapieha, L. Martinu, "Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers", Surface & Coatings Technology, 204 (2010) 3986-3994.

  3. M. Hala, O. Zabeida, B. Baloukas, J.E. Klemberg-Sapieha, L. Martinu, "Time- and species-resolved plasma imaging as a new diagnostic approach for HIPIMS discharge characterization", IEEE Transactions on Plasma Science, Special Issue on HIPIMS and High Power Glow Discharges, 2010, 38 (11) 2010 3035-3039.

  4. J. Houska, J. E. Klemberg-Sapieha, and L. Martinu, "Atom-by-atom simulations of chemical vapor deposition of hydrogenated silicon nitride", J. Appl. Phys., 107 (2010) 083501-1-9.

  5. S. Hassani, J.E Klemberg-Sapieha, L. Martinu, "Mechanical, tribological and erosion behaviour of super-elastic hard Ti-Si-C coatings prepared by PECVD", Surface and Coatings Technology, 205 (5) (2010) 1426-1430.

  6. S. Guruvenket, M. Azzi , D. Li, J.A. Szpunar , L. Martinu , J.E. Klemberg-Sapieha, "Structural, mechanical, tribological, and corrosion properties of a-SiC:H coatings prepared by PECVD", Surface & Coatings Technology, 204 (2010) 3358-3365.

  7. M. Hala, N. Viau, O. Zabeida, J. E. Klemberg-Sapieha, L. Martinu, "Dynamics of reactive highpower impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging", J. Appl. Phys., 107 (2010) 043305-1-9.

  8. D. Li, S. Guruvenket, M. Azzi, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Corrosion and tribo-corrosion behavior of a-SiCx:H, a-SiNx:H and a-SiCxNy:H coatings on SS301 substrate", Surface and Coatings Technology, 204 (2010) 1616–1622.

  9. S. Hassani, M. Bielawski, W. Beres, M. Balazinski, L. Martinu, J.E. Klemberg-Sapieha, "Impact stress absorption and load spreading in multi-layered erosion-resistant coatings", Wear, 268 (2010) 770-776.

Haut

2009

  1. M. Dudek, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Effect of substrate bias on the micro- structure and properties of nanocom-posite titanium nitride – based films", Journal of Achievements in Materials and Manufacturing, Vol. 37, Dec. 2009, 416-421.

  2. S. Turcotte, S. Larouche, J.-N. Beaudry, L. Martinu, R.A. Masut, P. Desjardins, R. Leonelli, "Evidence of Valence Band Perturbations in GaAsN/GaAs(001): A Combined Variable-angle Spectroscopic Ellipsometry and Modulated Photoreflectance Investigation", Phys. Rev. B, 80 (2009) 085203.

  3. E. Çetinörgü, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Mechanical and Thermo-elastic Characteristics of Optical Thin Films Deposited by Dual Ion Beam Sputtering", Applied Optics, 48 (2009) 4536-4544.

  4. A. Amassian, M. Dudek, O. Zabeida, S.C. Gujrathi, J.E. Klemberg-Sapieha, L. Martinu, "Oxygen Incorporation and Charge Donor Activation via Subplantation During the Growth of Indium Tin Oxide Films", J. Vac. Sci. Technol. A, 27 (2009) 362-366.

  5. M. Dudek, A. Amassian, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu, "Ion Bombardment-induced Enhancement of the Properties of Indium Tin Oxide Films Prepared by Plasma-assisted Reactive Magnetron Sputtering", Thin Solid Films, 517 (2009) 4576–4582.

  6. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Relationships between Composition and Properties of (Cr/Ti)SiN and (Cr/Ti)CN Alloys: An ab initio Study", Journal of Physics - Condensed Matter, 21 (2009) 285302.

  7. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Formation and Behavior of Unbonded Hydrogen in a-C:H of Various Compositions and Densities", Surface & Coatings Technology, 203 (2009) 3770–3776.

  8. J. Houska, J.E. Klemberg-Sapieha, L. Martinu, "Atomistic Simulations of the Characteristics of TiSiN Nanocomposites of Various Compositions", Surface & Coatings Technology, 203 (2009) 3348-3355.

  9. J. Kalaš, R. Vernhes, S. Hřeben, J. Vlček, J.E. Klemberg-Sapieha, L. Martinu, "High-temperature Stability of the Mechanical and Optical Properties of Si–B–C–N Films Prepared by Magnetron Sputtering", Thin Solid Films, 518 (2009) 174-179.

  10. S. Guruvenket, D. Li, J.E. Klemberg-Sapieha, L. Martinu, J. Szpunar, "Mechanical and Tribological Properties of Duplex Treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN Coatings Deposited on 410 Low Alloy Stainless Steel", Surface and Coatings Technology, 203 (2009) 2905-2911.

  11. M. Azzi, M. Paquette, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Tribocorrosion Behavior of DLC-coated 316L Stainless Steel", Wear, 267 (2009) 860-866.

  12. M. Azzi, M. Benkahoul, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, "Tribological Properties of CrSiN-coated 301 Stainless Steel under Wet and Dry Conditions", Wear, 267 (2009) 882-889.

  13. M. Benkahoul, P. Robin, L. Martinu, J.E. Klemberg-Sapieha, "Tribological Properties of Duplex Cr–Si–N Coatings on SS410 Steel", Surface & Coatings Technology, 203 (2009) 934–940.

  14. K. I. Shingel, C. Roberge, O. Zabeida, M. Robert, J. E. Klemberg-Sapieha, “Solid emulsion gel as a novel construct for topical applications: synthesis, morphology and mechanical properties”, J. Mater. Sci: Mater. Med., 20 (2009) 681–689.

Haut

2008

  1. J. Čížek, J. Vlček, Š. Potocký, J. Houška, Z. Soukup, J. Kalaš, P. Jedrzejowski, J.E. Klemberg-Sapieha, L. Martinu, "Mechanical and Optical Properties of Quaternary Si–B–C–N Films Prepared by Reactive Magnetron Sputtering", Thin Solid Films, 516 (2008) 7286–7293.

  2. M. Creatore, S.M. Rieter, Y. Barrell, M.C.M. van de Sanden, R. Vernhes, L. Martinu, "Optical and Chemical Characterization of Expanding Thermal Plasma-deposited Carbon-containing Silicon Dioxide-like Films", Thin Solid Films, 516 (2008) 8547-8553.

  3. L.Ç. Özcan, F. Guay, R. Kashyap, L. Martinu, "Investigation of Refractive Index Modifications in CW CO2 Laser Written Planar Optical Waveguides", Opt. Commun., 281 (2008) 3686-3690.

  4. S. Hassani, J.E. Klemberg-Sapieha, M. Bielawski, W. Beres, L. Martinu, M. Balazinski, "Design of Hard Coating Architecture for the Optimization of Erosion Resistance", Wear, 265 (2008) 879–887.

  5. S. Larouche and L. Martinu, "Optical Filters with Prescribed Optical Thickness and Refined Refractive Indices", Applied Optics, 47 (2008) 4140-4146.

  6. E. Bousser, M. Benkahoul, L. Martinu, J.E. Klemberg-Sapieha, "Effect of Microstructure on the Erosion Resistance of Cr-Si-N Coatings", Surface and Coatings Technology, 203 (2008) 776-780.

  7. S. Hassani, M. Bielawski, W. Beres, L. Martinu, M. Balazinski, J.E. Klemberg-Sapieha, "Predictive Tools for the Design of Erosion Resistant Coatings", Surface and Coatings Technology, 203 (2008) 204-210.

  8. S. Larouche and L. Martinu, "OpenFilters: Open-Source Software for the Design, Optimization, and Synthesis of Optical Filters", Applied Optics, 47 (2008) C219-C230.

  9. J.-M. Lamarre, F. Billard, and L. Martinu, "Local Field Calculations of the Anisotropic Nonlinear Absorption Coefficient of Aligned Gold Nanorods Embedded in Silica", J. Opt. Soc. Am. B, 25 (2008) 961-971.

  10. J.-M. Lamarre, F. Billard, C. Harkati-Kerboua, M. Lequime, S. Roorda, and L. Martinu, "Anisotropic Nonlinear Optical Absorption of Gold Nanorods in a Silica Matrix", Optics Communications, 281 (2008) 331–340.

  11. B. Baloukas and L. Martinu, "Metameric Interference Security Image Structures", Applied Optics, 47 (2008) 1585 - 1593.

  12. M. Benkahoul, P. Robin, S.C. Gujrathi, L. Martinu, J.E. Klemberg-Sapieha, "Microstructure and mechanical properties of Cr–Si–N coatings prepared by pulsed reactive dual magnetron sputtering", Surface & Coatings Technology, 202 (2008) 3975–3980.

  13. L.C. Ozcan, F. Guay, R. Kashyap, L. Martinu, "Fabrication of buried waveguides in planar silica films using a direct CW laser writing technique", Journal of Non-Crystalline Solids, 354 (2008) 4833-4839.

  14. S. Larouche and L. Martinu, "Step method: A new synthesis method for the design of optical filers with intermediate refractive indices", Appl. Opt., 47 (2008) 4321-4330.

Haut

2007

  1. J.E. Klemberg-Sapieha, P. Jedrzejowski and L. Martinu, "Hard and Superhard Nanocomposite Coatings and their Tribo-mechanical Properties", J. Superhard Materials, 29 (2007) 147.

  2. A. Amassian, K. Kaminska, M. Suzuki, L. Martinu, K. Robbie, "Onset of shadowing-dominated growth in glancing angle deposition", App. Phys. Lett., 91 (2007) 173114-1-3.

  3. C. Harkati-Kerboua, J.-M. Lamarre, L. Martinu, S. Roorda, "Deformation, alignment and anisotropic optical properties of gold nanoparticles embedded in silica", Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, 257 (2007) 42-46.

  4. R. Snyders, E. Bousser, P. Amireault, J. E. Klemberg-Sapieha, E. Park, K. Taylor, K. Casey and L. Martinu "Tribo-Mechanical Properties of DLC Coatings Deposited on Nitrided Biomedical Stainless Steel" Plasma Process. Polym., 4 (2007) S1–S7.

  5. L.C. Ozcan, V. Treanton, Kashyap, L. Martinu, "High-Quality Flat-Top Micromachining of Silica by a Cw CO2 Laser" IEEE Photonics Technology Letters, 19 (2007) 459-461.

  6. R. Snyders, O. Zabeida, C. Roberges, K.I. Shingel, M.-P. Faure, L. Martinu, J.E. Klemberg-Sapieha, "Mechanism of Adhesion between Protein-based Hydrogels and Plasma Treated Polypropylene Backing", Surface Science, 601 (2007) 112-122.

  7. S. Larouche and L. Martinu, "Dispersion Implementation in Optical Filter Design by the Fourier Transform Method Using Correction Factors", Applied Optics, 46 (2007) 7436-7441.

  8. I. Zukerman, A. Raveh, Y. Shneor, R. Shneck, J.E. Klemberg-Saphieha, and L. Martinu, "Internal Stress of TiAl(B)N at High Temperatures", Surface and Coating Technology, 201 (2007) 6161- 6166.

  9. I. Zukerman, A. Raveh, Y. Landau, R. Weiss, R. Shneck, Y. Shneor, H. Kalman, J.E. Klemberg-Saphieha, L. Martinu, "Tribological Properties of Duplex Treated TiN/TiCN Coatings on Plasma Nitrided PH15-5 Steel", Surface & Coatings Technology 201 (2007) 6171–6175.

  10. I. Zukerman, A. Raveh, H. Kalman, J.E. Klemberg-Sapieha, L. Martinu, "Thermal Stability and Wear Resistance of Hard TiN/TiCN Coatings on Plasma Nitrides PH15-5 Steel" Wear, 263 (2007) 1249-1252.

  11. R. Snyders, K.I. Shingel, O. Zabeida, C. Roberges, M.-P. Faure, L. Martinu, and J.E. Klemberg-Sapieha, "Mechanical and Microstructural Properties of Hybrid Poly(ethylene glycol)-soy Protein Hydrogels for Wound Dressing Applications", J. Biomaterials Research, 83A (2007) 88-97.

Haut

2006

  1. A. Amassian, M. Svec, P. Desjardins, L. Martinu, "Interface Broadening Due to Ion Mixing During Thin Film Growth at the Radio-Frequency-Biased Electrode in a Plasma-Enhanced Chemical Vapor Deposition Environment", Journal of Vacuum Science and Technology A, 24 (2006) 2061-2069.

  2. V. Timoshevskii, M. Cote, G. Gilbert, R. Leonelli, S. Turcotte, J.-N. Beaudry, P. Desjardins, S. Larouche, L. Martinu, R.A. Masut, "Experimental and Theoretical Studies of the E+ Optical Transition in GaAsN Alloys", Phys. Rev. B, 74 (2006) 165120-1-165120-6.

  3. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, "Pulsed RF PECVD of a-SiNx:H Alloys: Properties, Growth Mechanism and Applications", J. Appl. Phys., 100 (2006) 63308.

  4. Y. Gao, N. Guo, B. Gauvreau, M. Rajabian, O. Skorobogata, E. Pone, O. Zabeida, L. Martinu, C. Dubois, M. Skorobogatiy, "Consecutive Solvent Evaporation and Co-Rolling Techniques for Polymer Multilayer Hollow Fiber Preform Fabrication", J. Mater. Res., 21 (2006) 1-9.

  5. P. Jedrzejowski, A. Amassian, E. Bousser, J.E. Klemberg-Sapieha, and L. Martinu, "Real-Time In-Situ Growth Study of TiN- and TiCxNy- Based Superhard Nanocomposite Coatings Using Spectroscopic Ellipsometry", Appl. Phys. Lett., 88 (2006) 071915.

  6. J. P. Masse, H. Szymanowski, O. Zabeida, A. Amassian, J.E. Klemberg-Sapieha and L. Martinu, "Stability and Effect of Annealing on the Optical Properties of Plasma Deposited Ta2O5 and Nb2O5 Films", Thin Solid Films, 515 (2006) 1674-1682.

  7. R. Vernhes, A. Amassian, J. E. Klemberg-Sapieha, L. Martinu, "RF Plasma Treatment of Porous SiNx:H Films for the Fabrication of Porous-Dense Multilayer Optical Filters with Optimized Interfaces", J. Appl. Phys., 99 (2006) 114315.

  8. A. Amassian, M. Gaidi, M. Chaker, L. Martinu, "Optical Depth Profiling of STO and Electro-optic PLZT Multilayer Structures for Active Waveguide Applications", J. Vac. Sci. Technol. A, 24 (2006) 55.

  9. A. Amassian, M. Svec, P. Desjardins, L. Martinu, "Dynamics of Ion Bombardment-Induced Modifications of Si(001) at the Radiofrequency-Biased Electrode in Low-Pressure Oxygen Plasmas: In Situ Spectroscopic Ellipsometry and Monte-Carlo Study", J. Appl. Phys., 100 (2006) 063526.

Haut

2005

  1. Amassian, P. Desjardins, L. Martinu, “Ion-Surface Interactions on c-Si (001) at the Radiofrequency-Powered Electrode in Low-Pressure Plasmas: Ex Situ Spectroscopic Ellipsometry and Monte-Carlo Simulation Study”, J. Vac. Sci. Technol. A24 (2005) 45. (also selected to appear in the December 19 issue of the Virtual Journal of Nanoscale Science and Technology).

  2. J.-M. Lamarre, Z. Yu, C. Harkati, S. Roorda, and L. Martinu, “Optical and Microstructural Properties of Nanocomposite Au/SiO2 Films Containing Particles Deformed by Heavy Ion Irradiation", Thin Solid Films, 479 (2005) 232-237.

  3. M. Tabbal, T. Christidis, P. Merel, M.A. El Khakani, M. Chaker, A. Amassian, L. Martinu, “Correlation between the sp2-phase Nanostructure and the Physical Properties of Unhydrogenated   Carbon Nitride”, J. Appl. Physics, 98 (2005) 44310-8. 

  4. H. Szymanowski, O. Zabeida, J. E. Klemberg-Sapieha and L. Martinu, “Optical Properties and Microstructure of Plasma Deposited Ta2O5 and Nb2O5 films”, J. Vac. Sci. Technol. A 23(2), (2005) 241-247.

  5. D.-Q. Yang, S. Poulin, L. Martinu, J. E. Klemberg-Sapieha, O. Zabeida and E. Sacher, “Microscale Chemical and Electrostatic Surface Patterning of Dow Cyclotene by N2 Plasma”, Appl. Surf. Sci., 242 (2005) 419-427.

  6. E. Klemberg-Sapieha, L. Martinu, N.L.S. Yamasaki and C.W. Lantman, “Tailoring the Adhesion of Optical Films on Polymethyl-methacrylate by Plasma-induced Surface Stabilization”, Thin Solid Films, 476 (2005) 101-107.

  7. K. Kaminska, A. Amassian, L. Martinu, K. Robbie, “Growth of Vacuum Evaporated Ultra-Porous Silicon Studied With Spectroscopic Ellipsometry and Scanning Electron Microscopy”, J. Appl. Phys. 97 (2005) 13511.

  8. M. Gaidi, L. Stafford, A. Amassian, M. Chaker, J. Margot, L. Martinu, and M.    Kulishov, “Influence of the Microstructure on the Optical Characteristics of SrTiO3 Thin Films”, Journal of Materials Research, 20 (2005) 68.

Haut

2004

  1. A. Amassian, R. Vernhes, J.E. Klemberg-Sapieha, P. Desjardins, L. Martinu “Interface Engineering During Plasma-enhanced Chemical Vapor Deposition of Porous/dense SiN1.3 Optical Multilayers”, Thin Solid Films, 469-470 (2004) 47-53.

  2. A. Raveh, A. Rubinshtein, M. Weiss, M.H. Mintz , J.E. Klemberg-Sapieha, and L. Martinu, “Ta-C Micro-Composite Material Formed by Heat Treatment of Plasma Carburized Layer”, Thin Solid Films, 466 (2004) 151-157.

  3. P. Jedrzejowski, J. E. Klemberg-Sapieha, L. Martinu, “Quaternary Hard Nanocomposite TiCxNy/SiCN Coatings Prepared by PECVD”, Thin Solid Films, 466 (2004) 189-196.

  4. S. Larouche, H. Szymanowski, J.E. Klemberg-Sapieha, L. Martinu, and S. Gujrathi, “Microstructure of Plasma-Deposited SiO2/TiO2 Optical Films”, J. Vac. Sci. Technol. A, 22(2) (2004) Jul/Aug. 1200-1207.

  5. J.E. Klemberg-Sapieha, J. Oberste-Berghaus, L. Martinu, R. Blacker, I. Stevenson, G. Sadkhin, D. Morton, S. McEldowney, B. Klinger, P. Martin, N. Court, S. Dligatch, M. Gross, R.P. Netterfield, “Mechanical Characteristics of Optical Coatings Prepared by Different Techniques: A Round Robin Study”, Applied Optics, 43 (13) (2004) 2670-2679.

  6. P. Jedrzejowski, B. Baloukas, J.E. Klemberg-Sapieha, and L. Martinu, “Optical Characteristics and Color of TiN/SiN1.3 Nanocomposite Coatings, J. Vac. Sci. Technol. A, 22(3) (2004) 725-733.

  7. A. Raveh, A. Rubinshtein, M. Weiss, M.H. Mintz , J.E. Klemberg-Sapieha, and L. Martinu, “Ta-C Micro-Composite Material Formed by Heat Treatment of Plasma Carburized Layer”, Thin Solid Films, 466 (2004) 151-157.
     

  8. M. Gaidi, A. Amassian, M. Chaker, M. Kulishov, and L. Martinu, “Pulsed Laser Deposition of PLZT Films : Structural and Optical Characterization”, Applied Surface Science, 226 (2004) 347-354.

  9. R. Vernhes, O. Zabeida, J.E. Klemberg-Sapieha, and L. Martinu, “Single Material Inhomogeneous Optical Filters Based on Microstructural Gradients in Plasma Deposited Silicon Nitride”, Applied Optics, , 43 (2004) 97-103.

  10. A. Amassian, P. Desjardins and L. Martinu, “Study of TiO2 Film Growth Mechanism in Low-Pressure Plasma by in situ real-time spectroscopic ellipsometry”’ Thin Solid Films, 447-448 (2004) 40-45. 

  11. L. Martinu and R. Shimshock, “Advances in Optical Coatings on Plastic Substrates”, Vacuum and Coating Technology, March 2003, pp. 22-29 (invited).

  12. P. Jedrzejowski, J. Cizek, J.E. Klemberg-Sapieha, J. Vlcek, and L. Martinu, “Plasma Deposition and Properties of SiCN Films – Thin Solid Films, 447-448 (2004) 201-207.

Haut

2003

  1. A. M. Wrobel, I. Blaszczyk, A. Walkiewicz-Pietrzykowska, A. Tracz, J. E. Klemberg-Sapieha, T. Aoki, and Y. Hatanaka “Remote hydrogen-nitrogen plasma chemical vapor deposition from a tetramethyldisilazane source. Part 1. Mechanism of process, structure and surface morphology of deposited amorphous hydrogenated silicon carbonitride films” J. Mater. Chem., 13 (2003 ) 731 -737.

  2. P. Jedrzejowski, J. E. Klemberg-Sapieha, L. Martinu, “ Relationship between the mechanical properties and the microstructure of nanocomposite TiN/SiN1.3 coatings by low temperature plasma enchanced chemical vapor deposition” Thin Solid Films, 426 (2003) 150-156.

  3. L. Martinu and R. Shimshock, “Advances in Optical Coatings on Plastic Substrates”, Vacuum and Coating Technology, March 2003, pp. 22-29 (invited).

  4. P. Jedrzejowski, J.E. Klemberg-Sapieha, and L. Martinu, Microstructure and Mechanical Properties of Plamas Deposited Ultrahard TiN/SiN1.3 Nano-Composite Films, Thin Solid Films, 426 (2003) 150-159.

  5. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Nakanishi, T. Aoki, and Y. Hatanaka “Remote Hydrogen Plasma Chemical Vapor Deposition from (Dimethylsilyl)(trimethylsilyl)methane. 1. Kinetics of Process; Chemical and Morphological Structure of Deposited Silicon-Carbon Films” Chemistry of Materials, Vol.15, Nb. 8 (2003 ) 1749-1756.

  6. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Nakanishi, T. Aoki, and Y. Hatanaka “Remote Hydrogen Plasma Chemical Vapor Deposition from (Dimethylsilyl)(trimethylsilyl)methane. 2. Property- Structure Relationships for Resulting Silicon-Carbon Films” Chemistry of Materials, Vol.15, Nb. 8 (2003 ) 1757-1762.

Haut

2002

  1. D. Poitras, S. Larouche and L. Martinu, “Design and Plasma Deposition of Dispersion-corrected Multiband Rugate Filters”, Applied Optics 41 (2002) 5249-5255.

  2. J. Hong, F. Truica-Marasescu, L. Martinu and M.R. Wertheimer, “An Investigation of Plasma-Polymer Interactions by Mass Spectrometry”, Plasmas and Polymers, 7 (2002) 245-260.

  3. A. M. Wrobel, A. Walkiewicz-Pietrzykowska, J. E. Klemberg-Sapieha, Y. Hatanaka, T. Aoki and Y. Nakanishi, “Remote Hydrogen Plasma Chemical Vapor Deposition of Silocon-Carbon Thin-Film Materials from a Hexamethylsilane Source: Characterization of the Process and Deposits” Journal of Applied Polymer Science, (2002) 1445-1458.

Haut

2001

  1. A. Sadough-Vanini, D.-Q. Yang, L. Martinu, and E. Sacher, “The Adhesion of Evaporated Copper to Dow Cyclotene 3022, Determined by Microscratch Testing”, The Journal of Adhesion, 77 (2001) 309-321.

  2. A. Lefèvre, L.J. Laurent, L. Martinu, and M.R. Wertheimer, "Structural Properties of Silicon Dioxide Thin Films Densified by Medium-energy Particles", Phys. Rev. B, 64 (2001) 115429.

  3. D.-Q. Yang, L. Martinu, E. Sacher, and A. Sadough-Vanini, "Nitrogen Plasma Treatment of the Dow 3022 Surface and its Reaction with Evaporated Copper", Appl. Surf. Sci., 177 (2001) 85-95.

  4. D. Dalacu, J.E. Klemberg-Sapieha, and L. Martinu, “XPS Analysis of Discontinuous Gold Films”, Surface Science, 472 (2001) 33-40.

  5. D. Dalacu and L. Martinu, “Optical Properties of Discontinuous Gold Films: Finite Size Effects”, J. Opt. Soc. Am. B, 18 (2001) 85-90.

  6. A. Raveh, J. Danon, A. Hayon, A. Rubinshtein, R. Shneck, J.E. Klemberg-Sapieha, and L. Martinu, “Characterization of Carburized Tantalum Layers Produced by Inductive RF Plasma”, Thin Solid Films, 392 (2001) 56-64.

  7. C. Campillo, S. Illias, C.F.M. Borges, M. Moisan, and L. Martinu, "Enhanced Diamond Film Adhesion on Colbalt-Cemented WC Substrate", New Diamond and Frontier Carbon Technology, 11 (2001) 147-156.

Haut

2000

  1. D. Dalacu and L. Martinu, “Temperature Dependence of the Surface Plasmon Resonance in Au/SiOFilms”, Appl. Phys. Lett., 77 (2000) 4283-4285.

  2. L. Martinu and D. Poitras, "Plasma Deposition of Optical Films and Coatings: A Review", J. Vac. Sci. Technol. A, 18 (2000) 2619-2645, (invited).

  3. J. Vlcek, K. Rusnak, V. Hajek, and L. Martinu, “New Approach to Understanding the Reactive Magnetron Sputtering of Hard Carbon Nitride Films”, Diamond and Related Materials, 9 (2000) 582-586.

  4. S.G. Wallace, B.J. Robinson, P. Mascher, H.K. Haugen, D.A. Thompson, D. Dalacu, and L. Martinu, "Refractive Indices of InGaAsP Lattice-matched to GaAs at Wavelengths Relevant to Device Design",  Appl. Phys. Letters, 26 (2000) 2791-2793.

  5. O. Zabeida, A. Hallil, M. R. Wertheimer, and L. Martinu, "Time Resolved Measurements of Ion Energy Distributions in Dual-mode Pulsed Microwave/Radiofrequency Plasma", J. Appl. Phys., 88 (2000) 635.

  6. A. Hallil, O. Zabeida, M.R. Wertheimer, and L. Martinu, "Mass-resolved Ion Energy Distributions in Continuous Dual Mode Microwave/Radiofrequency Plasmas in Argon and Nitrogen", J. Vac. Sci. Technol A, 18 (2000) 882-890.

  7. A. Rubinshtein, R. Shneck, A. Raveh, J.E. Klemberg-Sapieha, and L. Martinu, "Carburizing of Tantalum by Radio-Frequency Plasma Assisted CVD", J. Vac. Sci. Technol. A, 18 (2000) 2017-2022.

  8. D. Poitras and L. Martinu, "Interphase in Plasma-deposited Films on Plastics: Effect on the Spectral Properties of Optical Filters", Applied Optics, 39 (2000) 1168.

  9. A. Bergeron, D. Poitras, and L. Martinu, "Interphase in Plasma-deposited Silicon Nitride Optical Films on Polycarbonate: In-situ Ellipsometric Characterization", Opt. Eng., 39(2000) 825.

  10. D. Dalacu and L. Martinu, "Spectroellipsometric Characterization of Plasma-deposited Au/SiO2 Nanocomposite Films", J. Appl. Phys., 87 (2000) 228.

  11. A.M. Wróbel, A. Walkiewicz-Pietrzkowska, M. Stasiak, J.E. Klemberg-Sapieha, D.M. Bieliński, T. Aoki and Y. Hatanaka “Remote Microwave Plasma Chemical Vapor Deposition of Thin Si:N:C Films from Single-Source Precursor”, Plasmas and Polymers, Journal of Wide Bandgap Materials, Vol. 8, No. 1, (2000) 1- 12.

  12. D. Rats, L. Martinu, and J. von Stebut, "Mechanical Properties of Plasma-deposited SiOxNy Coatings on Polymer Substrates Determined by Low Carrying-capacity Techniques", Surface and Coatings Technology, 123 (2000) 36-43.

Haut

1999

  1. A. Leonard, P. Bertrand, M.K. Shi, E. Sacher, and L. Martinu, "Plasma Surface Modification of Polymers Studied by TOF-SIMS", Plasmas and Polymers, 4 (1999) 97-111.

  2. J. Vlcek, K. Rusnak, V. Hajek, and L. Martinu, "Reactive Magnetron Sputtering of CNx Films: Ion Bombardment Effects and Process Characterization Using Optical Emission Spectroscopy", J. Appl. Phys., 86 (1999) 3646.

  3. A.C. Fozza, J.E. Klemberg-Sapieha, and M.R. Wertheimer, "Vacuum Ultraviolet Irradiation of Polymers", Plasmas and Polymers 4, (1999) 183-205.

  4. S. Dahl, D. Rats, J. von Stebut, L. Martinu, and J. E. Klemberg-Sapieha, "Micro-Mechanical Characterization of Plasma Treated Polymer Surfaces", Thin Solid Films, 355-356 (1999) 290-294.

  5. O. Zabeida and L. Martinu, "Ion Energy Distributions in Pulsed Large Area Microwave Plasma", J. Appl. Phys., 85 (1999) 6366-6372.

  6. V. Hajek, K. Rusnak, J. Vlcek, L. Martinu, and S.C. Gujrathi, "Influence of Substrate Bias Voltage on the Properties of CNFilms Prepared by Reactive Magnetron Sputtering", J. Vac. Sci. Technol. A., 17 (1999) 899-908.

  7. D. Dalacu and L. Martinu, "Spectroellipsometric Characterization of Plasma-deposited Au/Fluoropolymer Nanocomposite Films", J. Vac. Sci. Technol. A, 17 (1999) 877-883.

  8. D. Rats, D. Poitras, J.M. Soro, L. Martinu, and J. von Stebut, "Mechanical Properties of Plasma-deposited Silicon–based Inhomogeneous Optical Coatings", Surface and Coatings Technol., 111 (1999) 220-228.

  9. D. Rats, V. Hajek, and L. Martinu, "Micro-scratch Analysis and Mechanical Properties of Plasma-deposited Silicon-based Coatings on Polymer Substrates", Thin Solid Films, 340 (1999) 33-39.

Haut

1998

  1. S. Schelz, L. Martinu and M. Moisan, "Diamond Nucleation Enhancement by Pretreating the Silicon Substrate with a Fluorocarbon Plasma", Diamond and Related Materials, 7 (1998) 1291-1302.

  2. A. Bergeron, J.E. Klemberg-Sapieha and L. Martinu, "Structure of the Interfacial Region between Polycarbonate and Plasma-deposited SiN1.3 and SiO2 Optical Coatings Studied by Ellipsometry", J. Vac. Sci. Technol. A, 16 (1998) 3227-3234.

  3. D. Poitras and L. Martinu, "Simple Method for Determining Slowly Varying Refractive Index Profiles from in situ Spectrophotometric Measurements", Applied Optics, 37(19) (1998) 4160-4167.

  4. N. Bertrand, B. Drévillon, A. Gheorghiu, C. Sénémaud, L. Martinu and J.E. Klemberg-Sapieha, "Adhesion Improvement of Plasma-deposited Silica Thin Films on Stainless Steel Substrate Studied by X-ray Photoemission Spectroscopy and In Situ Infrared Ellipsometry", J. Vac. Sci. Technol. A, 16 (1998) 116-123.

  5. M. Bousmina, Hua Qiu, M. Grmela and J.E. Klemberg-Sapieha, “Diffusion at Polymer/Polymer Interfaces Probed by Rheological Tools”, Macromolecules, 31 (1998) 8273-8280.

  6. A.S. da Silva Sobrinho, M. Latrèche, G. Czeremuszkin, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Transparent Barrier Coatings on Polyethylene Terephthalate by Single- and Dual-Frequency Plasma-Enhanced Chemical Vapor Deposition", J. Vac. Sci. Technol. A, 16 (1998) 3190-3198.

  7. M.R. Wertheimer, J.E. Klemberg-Sapieha, J. Cerny and S. Liang "Modification of Active Carbon  by Hydrophobic Plasma Polymers : II Fabric Substrates", Plasmas and Polymers, 3 (1998) 151-163.

  8. A.S. da Silva Sobrinho, N. Schühler, J.E. Klemberg-Sapieha, M.R. Wertheimer, M. Andrews and S.C. Gujrathi, "Plasma-Deposited Silicon Oxide and Silicon Nitride Films on Poly(ethylene-terephthalate):  A Multitechnique Study of the Interphase Regions", J. Vac. Sci. Technol. A, 16 (1998) 2021 - 2030.

Haut

1997

  1. E. Sacher, L. Martinu et M. Meunier, "La métallisation de polymères:  cuivre sur les fluoropolymères", J. Phys. IV,  France, 7 (1997) C6-239-247.

  2. V. Hajek, K. Rusnak, J. Vlcek, L. Martinu and H.M. Hawthorne, "Tribological Study of CNX Films Prepared by Reactive D.C. Magnetron Sputtering", Wear, 213 (1997) 80-86.

  3. S. Schelz, C.F.M. Borges, L. Martinu and M. Moisan, "Chemical Vapor Deposition of Diamond Films on Hydrofluoric Acid Etched Silicon Substrates", J. Vac. Sci. Technol A, 15(5) (1997) 2743-2749.

  4. M.R. Wertheimer, L. Martinu and J.E. Klemberg-Sapieha, "NSERC Industrial Research Chair on Low Pressure Plasma Processing of Materials", Plasmas and Polymers, 2 (1997) 53-64.

  5. J.E. Klemberg-Sapieha, D. Poitras, L. Martinu, N.L.S. Yamasaki, C.W. Lantman, "Effect of Interface on the Characteristics of Functional Films Deposited on Polycarbonate in Dual-Frequency Plasma", J. Vac. Sci. Technol. A., 15(3) (1997) 985-991.

  6. D. Popovici, J.E. Klemberg-Sapieha, G. Czeremuszkin, E. Sacher, M. Meunier and L. Martinu, "Copper Metallization of Teflon AF-1600, Using Evaporation and Sputtering, for Multilevel Interconnect Devices", Microelectronic Engineering, 33 (1997) 217-222.

  7. A. Houdayer, G. Cerny, J.E. Klemberg-Sapieha, G. Czeremuszkin and M.R. Wertheimer, "MeV Proton Irradiations and Atomic Oxygen Exposure of Spacecraft Materials with SiO2 Protective Coatings", Nucl. Instrum. and Meth. in Phys. Res. Section B, 131 (1997) 335-340.

  8. A.C. Fozza, J. Roch, J.E. Klemberg-Sapieha, A. Kruse, A. Holländer and M.R. Wertheimer, "Oxidation and Ablation of Polymers by Vacuum-UV Radiation from Low-Pressure Plasmas", Nucl. Instrum. and Meth. in Phys. Res. Section B, 131 (1997) 205-210.

  9. E. Sacher and J.E. Klemberg-Sapieha, "An Analysis of the X-ray Photoelectron Spectrum of Teflon AF1600", J. Vac. Sci. Technol. A, 15 (4) (1997), 2143-2147.

Haut

1996

  1. N. Bertrand, B. Drévillon, J.E. Klemberg-Sapieha and L. Martinu, "In situ IR Ellipsometry Study of the Adhesion and Growth of Plasma Deposited Silica Thin Films on Stainless Steel Substrates", Thin Solid Films, 290-291 (1996) 264-270.

  2. S. Vallon, R. Brenot, A. Hofrichter, B. Drévillon, A. Gheorghiu, C. Sénémaud, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Mechanisms of Silica Layers on Plasma-Treated Polymers.  Part II:  Polypropylene", J. Adh. Sci. Technol., 10(12) (1996) 1313-1332.

  3. S. Vallon, A. Hofrichter, L. Guyot, B. Drévillon, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Mechanisms of Silica Layers on Plasma-Treated Polymers.  Part I:  Polycarbonate", J. Adh. Sci. Technol., 10 (12) (1996) 1287-1311.

  4. S. Vallon, A. Hofrichter, B. Drévillon, J.E. Klemberg-Sapieha, L. Martinu and F. Poncin-Epaillard, "Adhesion Improvement of Silica Layers to Polypropylene Induced by Nitrogen Plasma Treatment", Thin Solid Films, 290/291 (1996) 68-73.

  5. S. Vallon, B. Drévillon, F. Poncin-Epaillard, J.E. Klemberg-Sapieha and L. Martinu, "Argon Plasma Treatment of Polycarbonate:  In situ Spectroellipsometry Study and Polymer Characterizations", J. Vac. Sci. Technol. A., 14 (1996) 3194-3199.

  6. C.F.M. Borges, S. Schelz, L. Martinu and M. Moisan, "Effect of Silicon Substrate Orientation on the Nucleation and Adhesion of CVD Diamond Films", Diamond and Related Materials, 5 (1996) 1402-1406.

  7. J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, P. Günther, R. Schellin, C. Thielemann and G. Sessler, "Plasma Deposition of Low Stress Electret Films for Electroacoustic and Solar Cell Applications", J. Vac. Sci. Technol. A, 14 (1996) 2775-2779.

  8. D. Poitras, P. Leroux, J.E. Klemberg-Sapieha, S.C. Gujrathi and L. Martinu, "Characterization of Inhomogeneous Si-based Optical Coatings Deposited in Dual-Frequency Plasma", Optical Engineering, 35(9) (1996), 2693-2699.

  9. S.C. Gujrathi, D. Poitras, J.E. Klemberg-Sapieha and L. Martinu, "ERD-TOF Characterization of Silicon Compound Multilayer and Graded Index Optical Coatings", Nuclear Instruments and Methods in Physics Research B, 118 (1996) 560-565.

  10. C.F.M. Borges, S. Schelz, L. St-Onge, M. Moisan and L. Martinu, "Silicon Contamination of Diamond Films Deposited on Si Substrates in Fused Silica-based Reactors", J. Appl. Phys., 79 (1996) 3290-3298.

  11. M.R. Wertheimer, H.R. Thomas, M.J. Perri, J.E. Klemberg-Sapieha, and L. Martinu, "Plasmas and Polymers:  From Laboratory to Large Scale Commercialization", Pure and Applied Chemistry, 68(5) (1996), 1047-1053 (invited).

  12. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "The Influence of Vacuum-Ultraviolet Radiation of Polyethylene terephthalate", J. Polym. Sci.-A:  Polym. Chem. 34 (1996) 1511-1516.

  13. A. Nihlstrand, T. Hjertberg, H.P. Schreiber and J.E. Klemberg-Sapieha, "Plasma Treatment and Adhesion Properties of a Rubber-Modified Polypropylene", J. Adhesion Sci. Technol., 10 (7) (1996) 651-675.

Haut


1995

  1. P. Reinke, S. Bureau, J.E. Klemberg-Sapieha, and L. Martinu, "Ion Energy Distributions in Dual-and Single-mode Microwave/Radiofrequency Plasma", J. Appl. Phys., 78(8) (1995) 4855-4858.

  2. L. Martinu, "Advances in Diamond, Diamond-like Carbon and Related Materials", Fine Mechanics and Optics (JMO), 40 (5-6)(1995) 186-189 (invited).

  3. M.K. Shi, L. Martinu, E. Sacher, A. Selmani, M.R. Wertheimer and A. Yelon, "Angle-Resolved XPS Study of Plasma-Treated Teflon PFA Surfaces", Surface and Interface Analysis, 23 (1995) 99-104.

  4. A. Lian, L. Martinu and M.R. Wertheimer, "Electrical Conduction in Double Layer P‑SiO2/Polymer Dielectric Structures", IEEE Trans. DEI, 2 (1995) 62-73.

  5. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Polymer Oxidation Induced by Vacuum-Ultraviolet Emission", Surface and Coatings Technol., 74-75 (1995) 55-58.

  6. A. Holländer, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Vacuum-Ultraviolet Induced Oxidation of Polymers: Polyethylene and Polypropylene", J. Polym. Sci.-A: Polym. Chem., 33 (1995) 2013-2025.

  7. W. Brinker, W. Wirges, G. Przyrembel, R. Gerhard-Multhaupt, J.E. Klemberg-Sapieha, L. Martinu, D. Poitras and M.R. Wertheimer, "Metallized Viscoelastic Control Layers for Light-Valve Projection Displays", Displays, 16 (1) (1995) 13-20.

Haut

1994

  1. P. Reinke, J.E. Klemberg-Sapieha, and L. Martinu, "Effect of Amorphous Carbon Layers on the Growth of Diamond in Dual-Frequency Plasma", J. Appl. Phys. 76 (10)(1994) 5754-5759.

  2. L. Martinu, J.E. Klemberg-Sapieha, O.M. Küttel, A. Raveh and M.R. Wertheimer, "Critical Ion Energy and Ion Flux in the Growth of Films by PECVD", J. Vac. Sci. Technol. A, 12 (4) (1994), 1360-1364.

  3. M.K. Shi, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer and A. Yelon, "Fluoro­polymer Surface Modification for Enhanced Metal Adhesion", J. Adh. Sci. Technol. 8(10) (1994), 1129-1141.

  4. E. Poiré, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, S. Liang, S.S. Barton and J.A. MacDonald, "Modification of Active Carbon by Hydrophobic Plasma Polymers", J. Appl. Polym. Sci.: Appl. Polym. Symp., 54 (1994) 185-196.

  5. M.K. Shi, B. Lamontagne, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer, and A. Yelon, "Metallization of Teflon PFA: II.  Interaction of Ti, Ag and Au measured by XPS", J. Vac. Sci. Technol. A, 12 (3) (1994), 807-812.

  6. M.K. Shi, B. Lamontagne, A. Selmani and L. Martinu, "X-Ray Photoelectron Spectroscopy Study of X-Ray Irradiated Metal/Fluoropolymer Interfaces", J. Vac. Sci. Technol. A, 12 (1) (1994)44-50.

  7. M.K. Shi, B. Lamontagne, A. Selmani, L. Martinu, E. Sacher, M.R. Wertheimer and A. Yelon, "Metallization of Teflon PFA: I. Interactions of Evaporated Cr and Al Measured by X-ray Photoelectron Spectroscopy", J. Vac. Sci. Technol. A, 12 (1) (1994) 29-34.

  8. A. Hollander, J.E. Klemberg-Sapieha and M.R. Wertheimer, "Vacuum Ultraviolet Induced Oxidation of Polyethylene", Macromolecules, 27, (1994) 2893-2895.

Haut

1993

  1. M.K. Shi, B. Lamontagne, L. Martinu and A. Selmani, "X-Ray Induced Modification of Metal/Fluoropolymer Interfaces", J. Appl. Phys., 74(3) (1993) 1744-1746.

  2. E.B.D. Bourdon, A. Raveh, S.C. Gujrathi and L. Martinu, "Etching of a-C:H Films by an Atomic Oxygen Beam", J. Vac. Sci. Technol. A, 11 (1993), 2530-2535.

  3. S. Sapieha, J. Cerny, J.E. Klemberg-Sapieha and L. Martinu, "Corona Versus Low Pressure Plasma Treatment:  Effect on Surface Properties and Adhesion of Polymers", J. Adhesion, 42 (1993), 91-102.

  4. E.M. Liston, L. Martinu and M.R. Wertheimer, "Plasma Surface Modification of Polymers for Improved Adhesion:  A Critical Review", J. Adh. Sci. Technol., 7 (10) (1993), 1091-1127 (invited).

  5. A. Raveh, L. Martinu, H.M. Hawthorne and M.R. Wertheimer, "Mechanical Properties of Dual-Frequency Plasma Deposited Diamond-like Carbon", Surf. Coat. Technol., 58 (1993) 45-55.

  6. L. Martinu, A. Raveh, D. Boutard, S. Houle, D. Poitras, N. Vella and M.R. Wertheimer, "Properties and Stability of Diamond-Like Carbon Films Related to Bonded and Unbonded Hydrogen", Diamond and Related Materials, 2 (1993) 673-677.

Haut

1992

  1. N. Amyot, J.E. Klemberg-Sapieha, M.R. Wertheimer, Y. Ségui, M. Moisan, "Electrical and structural studies of plasma-polymerized fluorocarbon films", Electrical Insulation, IEEE Transactions on 27 (6), (1992) 1101-1107.

  2. A. Raveh, L. Martinu, S.C. Gujrathi, J..E Klemberg-Sapieha, M.R. Wertheimer, "Structure-property relationships in dual-frequency plasma deposited hard aC: H films", Surface and Coatings Technology 53 (3), (1992) 275-282.

  3. P. Guenther, J.E. Klemberg-Sapieha, L. Martinu, M.R. Wertheimer, "Charge storage in plasma deposited thin films", Electrical Insulation and Dielectric Phenomena, Annual Report (1992) 67 - 73.
  4. L. Martinu, A. Raveh, A. Domingue, L. Bertrand, J.E. Klemberg-Sapieha, S.C. Gujrathi, M.R. Wertheimer, "Hard carbon films deposited under high ion flux", Thin Solid Films 208 (1), (1992) 42-47.

  5. O.M. Küttel, L. Martinu, D. Poitras, J.E. Klemberg-Sapieha, M.R. Wertheimer, "Diamond-like carbon films deposited in a dual microwave-radio-frequency plasma", Materials Science and Engineering: B 11 (1), (1992) 321-324.

Haut

1991

  1. J.E. Klemberg‑Sapieha, O.M. Küttel, L. Martinu and M.R. Wertheimer, "Dual-Frequency N2 and NH3 Plasma Modification of Polyethylene and Polyimide", J. Vac. Sci. Technol. A, 9 (1991) 2975-2981.

  2. A. Raveh, D. Marouani, R. Ydgar, J.E. Klemberg-Sapieha and A. Bettelheim, "Aging Effect of an Epoxy Resin on Joining of Aluminum Plates", J. of Adhesion, 36 (1991) 109-124.

Haut

1990

  1. O.M. Küttel, J.E. Klemberg‑Sapieha, L. Martinu and M.R. Wertheimer, "Energy Fluxes in Mixed Microwave/Radio Frequency Plasma", Thin Solid Films, 193/194 (1990) 155‑163.

  2. J.E. Klemberg‑Sapieha, O.M. Küttel, L. Martinu and M.R. Wertheimer, "Dual Microwave/Radio Frequency Plasma Deposition of Functional Coatings", Thin Solid Films, 193/194 (1990) 965‑972.

  3. R. d'Agostino, L. Martinu and V. Pische, "Effect of Bias and Temperature on the Bulk and Surface Properties of Gold‑containing Plasma Polymerized Fluorocarbons", Plasma Chemistry and Plasma Processing, 11 (1990) 1‑14.

  4. S. Sapieha, M. Verreault, J.E. Klemberg-Sapieha, E. Sacher and M.R. Wertheimer, "X-Ray Photoelectron Study of the Plasma Fluorination of Lignocellulose", Appl. Surf. Sci., 44 (1990) 165‑169.

Haut

1989

  1. L. Martinu, J.E. Klemberg‑Sapieha and M.R. Wertheimer, "Dual‑Mode Microwave/Radio Frequency Plasma Deposition of Dielectric Thin Films", Applied Physics Letters, 54 (1989) 2645‑2647.

Haut

S. Loquai, B. Baloukas, O. Zabeida, J.E. Klemberg-Sapieha, L. Martinu

polytechnique genie gauche fr cmyk